Silicone Hose Performance Test Specification
Sl.No.	Type of Test	Conditions		Specification
1	Burst Pressure at Ambient Temp.	When New		10 Bar ( Min)
2		After Air Ageing	In Air Temp.=180°C Time=168 Hrs.	7 Bar (Min)
3		After Air Ageing	In Engine Oil Temp.=150°C Time=168 Hrs.	7 Bar (Min)
4		After Pulsating Pressure Fatigue Test		7 Bar (Min)
5	Hot Bursting Pressure	( Temp.=155°C )		7 Bar (Min)
6	Resistance to Pulsating Pressure Temp.=260°C Pressure =0 to 3.00 Bar Frequency : 0.2 to 0.5 Hz	When New		200000 Cycles
7		After Ageing	In Air Temp.=180°C Time=168 Hrs.	150000 Cycles
8		After Ageing	In Engine Oil Temp.=150°C Time=168 Hrs.	150000 Cycles
9	Rubber / Aramid Fabric Reinforcement Adhesion			2 daN / cm (min)